Een MTS schroefset met Eibach veren, geschikt voor de BMW 8 serie E31 E31 840 i / 840 Ci / 850 i / 850 Ci / 850 Csi
Street variant
De ophanging van de Street-serie is de standaardconfiguratie van MTS Technik-ingenieurs, het garandeert een breed scala aan verlagingen en een balans tussen comfort en stijfheid.
Verlaging voorzijde: van 25 tot 75 mm
Verlaging achterzijde: van 25 tot 75 mm
Maximaal belasting (voor):1150 kg
Maximaal belasting (achter):1200 kg
Geschikt voor:01/90 - 12/99
Let op:
Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
Including M-Technik.
Rear thread adjustment block is mounted on the bottom.
After the purchase, the original front axle struts should be sent to the headquarters of MTS Technik. Prior to shipment, all elements such as hubs, bearings, covers, shock absorber inserts, bolts and nuts should be dismantled. If the axle struts are delivered without prior disassembly of the above-mentioned parts or if MTS Technik finds any damage, such as broken column bolts, the axle struts will be returned or an additional fee will be charged.
original front axle struts need to be sent in advance, strut diameter at the front axle of 55 mm
Een MTS schroefset met Eibach veren, geschikt voor de BMW 8 serie E31 E31 840 i / 840 Ci / 850 i / 850 Ci / 850 Csi
Street variant
De ophanging van de Street-serie is de standaardconfiguratie van MTS Technik-ingenieurs, het garandeert een breed scala aan verlagingen en een balans tussen comfort en stijfheid.
Verlaging voorzijde: van 25 tot 75 mm
Verlaging achterzijde: van 25 tot 75 mm
Maximaal belasting (voor):1150 kg
Maximaal belasting (achter):1200 kg
Geschikt voor:01/90 - 12/99
Let op:
Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
Including M-Technik.
Rear thread adjustment block is mounted on the bottom.
After the purchase, the original front axle struts should be sent to the headquarters of MTS Technik. Prior to shipment, all elements such as hubs, bearings, covers, shock absorber inserts, bolts and nuts should be dismantled. If the axle struts are delivered without prior disassembly of the above-mentioned parts or if MTS Technik finds any damage, such as broken column bolts, the axle struts will be returned or an additional fee will be charged.
original front axle struts need to be sent in advance, strut diameter at the front axle of 55 mm
