Een MTS schroefset met Eibach veren, geschikt voor de BMW 7 serie E23 E23 728 / 728i / 730 / 732i / 733i / 735i / 745i
SPORT variant
De ophanging van de Sport-serie is een aanbieding voor liefhebbers van aanzienlijk verlagende en stijvere eigenschappen, een set speciaal voor veeleisende bestuurders
Verlaging voorzijde: van 35 tot 95 mm
Verlaging achterzijde: van 20 tot 110 mm
Maximaal belasting (voor):1040 kg
Maximaal belasting (achter):1150 kg
Geschikt voor:09/81 - 04/88
Let op:
Not for 4x4.
Only for vehicles without NIVO / factory pneumatic suspension.
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
After the purchase, the original front axle struts should be sent to the headquarters of MTS Technik. Prior to shipment, all elements such as hubs, bearings, covers, shock absorber inserts, bolts and nuts should be dismantled. If the axle struts are delivered without prior disassembly of the above-mentioned parts or if MTS Technik finds any damage, such as broken column bolts, the axle struts will be returned or an additional fee will be charged.
original front axle struts need to be sent in advance, strut diameter at the front axle of 52 mm
Een MTS schroefset met Eibach veren, geschikt voor de BMW 7 serie E23 E23 728 / 728i / 730 / 732i / 733i / 735i / 745i
SPORT variant
De ophanging van de Sport-serie is een aanbieding voor liefhebbers van aanzienlijk verlagende en stijvere eigenschappen, een set speciaal voor veeleisende bestuurders
Verlaging voorzijde: van 35 tot 95 mm
Verlaging achterzijde: van 20 tot 110 mm
Maximaal belasting (voor):1040 kg
Maximaal belasting (achter):1150 kg
Geschikt voor:09/81 - 04/88
Let op:
Not for 4x4.
Only for vehicles without NIVO / factory pneumatic suspension.
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
After the purchase, the original front axle struts should be sent to the headquarters of MTS Technik. Prior to shipment, all elements such as hubs, bearings, covers, shock absorber inserts, bolts and nuts should be dismantled. If the axle struts are delivered without prior disassembly of the above-mentioned parts or if MTS Technik finds any damage, such as broken column bolts, the axle struts will be returned or an additional fee will be charged.
original front axle struts need to be sent in advance, strut diameter at the front axle of 52 mm
