Een MTS schroefset met Eibach veren, geschikt voor de BMW 5 serie E34 Sedan E34 518i / 520i / 525i / 530i / 535i / 540i / 524td / 525tds / M5
SPORT variant
De ophanging van de Sport-serie is een aanbieding voor liefhebbers van aanzienlijk verlagende en stijvere eigenschappen, een set speciaal voor veeleisende bestuurders
Verlaging voorzijde: van 20 tot 95 mm
Verlaging achterzijde: van 20 tot 85 mm
Maximaal belasting (voor):1060 kg
Maximaal belasting (achter):1300 kg
Geschikt voor:01/88 - 12/95
Let op:
Front and rear axle height adjustable (threaded shock absorber housing).
Not for 4x4.
Only for vehicles without NIVO / factory pneumatic suspension.
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
Independent height adjustment at the lower brackets on the front dampers.
Set includes 2x upper "camber plates" on the front axle.
The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
After the purchase, the original front axle struts should be sent to the headquarters of MTS Technik. Prior to shipment, all elements such as hubs, bearings, covers, shock absorber inserts, bolts and nuts should be dismantled. If the axle struts are delivered without prior disassembly of the above-mentioned parts or if MTS Technik finds any damage, such as broken column bolts, the axle struts will be returned or an additional fee will be charged.
original front axle struts need to be sent in advance, strut diameter at the front axle of 55 mm
Een MTS schroefset met Eibach veren, geschikt voor de BMW 5 serie E34 Sedan E34 518i / 520i / 525i / 530i / 535i / 540i / 524td / 525tds / M5
SPORT variant
De ophanging van de Sport-serie is een aanbieding voor liefhebbers van aanzienlijk verlagende en stijvere eigenschappen, een set speciaal voor veeleisende bestuurders
Verlaging voorzijde: van 20 tot 95 mm
Verlaging achterzijde: van 20 tot 85 mm
Maximaal belasting (voor):1060 kg
Maximaal belasting (achter):1300 kg
Geschikt voor:01/88 - 12/95
Let op:
Front and rear axle height adjustable (threaded shock absorber housing).
Not for 4x4.
Only for vehicles without NIVO / factory pneumatic suspension.
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
Independent height adjustment at the lower brackets on the front dampers.
Set includes 2x upper "camber plates" on the front axle.
The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
After the purchase, the original front axle struts should be sent to the headquarters of MTS Technik. Prior to shipment, all elements such as hubs, bearings, covers, shock absorber inserts, bolts and nuts should be dismantled. If the axle struts are delivered without prior disassembly of the above-mentioned parts or if MTS Technik finds any damage, such as broken column bolts, the axle struts will be returned or an additional fee will be charged.
original front axle struts need to be sent in advance, strut diameter at the front axle of 55 mm
