Een MTS schroefset met Eibach veren, geschikt voor de BMW 3 serie E90 Sedan E90 316i / 318i / 320i / 320si / 323i / 325i / 330i / 335i / 316d / 318d / 320d / 325d / 330d / 335d
COMFORT variant
De ophanging van de Comfort-serie kunt u de verlaging van de auto aanpassen en het rijden verbeteren, met behoud van het grootst mogelijke comfort.
Verlaging voorzijde: van 20 tot 50 mm
Verlaging achterzijde: van 30 tot 65 mm
Maximaal belasting (voor):1090 kg
Maximaal belasting (achter):1135 kg
Geschikt voor:02/04 - 02/12
Let op:
Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
Not for 4x4.
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set.
Including M-Technik.
Een MTS schroefset met Eibach veren, geschikt voor de BMW 3 serie E90 Sedan E90 316i / 318i / 320i / 320si / 323i / 325i / 330i / 335i / 316d / 318d / 320d / 325d / 330d / 335d
COMFORT variant
De ophanging van de Comfort-serie kunt u de verlaging van de auto aanpassen en het rijden verbeteren, met behoud van het grootst mogelijke comfort.
Verlaging voorzijde: van 20 tot 50 mm
Verlaging achterzijde: van 30 tot 65 mm
Maximaal belasting (voor):1090 kg
Maximaal belasting (achter):1135 kg
Geschikt voor:02/04 - 02/12
Let op:
Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
Not for 4x4.
If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set.
Including M-Technik.
